FumeVac

Welding Fume Extractor Vacuums

Click here to check out the new Strata Airforce!

We specialise in servicing the welding industry by providing top quality welding fume extractor vacuums.  We supply a range of Single Phase and three phase machines: JS, ZD and ZS series extractor vacuums.

FumeVac extraction equipment operates under the source capture principle. This maximizes the protection to workers by removing welding smoke, welding fumes and laboratory fumes before they get into the operators breathing area.

Our smoke and fume extraction systems are reliable, durable and competitively priced.  FumeVac extractor vacuums also meet WorkSafe, Health and Safety standards.

We have the right extraction vacuum unit for you

JD SINGLE ARM Manual Cleaning

Up to 17m2 Filter Area

Suitable for the purification of smoke and dust in welding, polishing, cutting and grinding. High purification efficiency, low operation noise, flexible use and small footprint.

JS DOUBLE ARM Manual Cleaning

Up to 25m2 Filter Area

For the purification of smoke & dust in welding, polishing, cutting & grinding. High purification efficiency, low noise, flexible use & small footprint. makes this a great extractor.

ZD SINGLE ARM Jet Pulse Cleaning

Up to 17m2 Filter Area

For the purification of smoke and dust in welding, cutting, grinding, polishing and other processes produced and rare metals, precious metals recycling, small metal particles.

ZS DOUBLE ARM Jet Pulse Cleaning

Up to 25m2 Filter Area

For the purification of smoke and dust in welding, cutting, grinding, polishing and other processes produced and rare metals, precious metals recycling, small metal particles.

Includes:

  • a cellulose filter for safe welding fume filtration, with optional H14 filter – available on request
  • a lightweight ‘Ready to Use’ 4.5m Strata MIG welding torch with integrated fume extraction at the nozzle
  • a 5m fume hose

Specifications

Motor type 2 by-pass motors
Power (KW) 2.4
Voltage | Frequency (V | Hz) 230 | 50
Max vacuum (mbar) 250
Max Suction (m3/hr) 300
Max Air Flow (CFM) 224
Noise level (dBA) 72
Capacity (L) 20
Dimensions (mm) length*width*height 534 x 471 x 983
Weight 38kg
Primary Filter Class M Cartridge
Secondary Filter Spark trap
Optional Filter H14 Cartridge
Strata Airforce Welding Fume Extractor

Worksafe New Zealand

 

 

All FumeVac Extractor Vacuums meet Worksafe standards.

Vapours, gas, and other fumes can put workers and the public at risk when inhaled. These fumes can also cause occupational asthma and damage the nervous system.

The work of many different industries, in particular construction and manufacturing, can produce a range of fumes, depending on the worksite.

These include but are not limited to:

  • Asphalt
  • Diesel fumes
  • Fumes from chemicals used (eg, in a manufacturing process).

Exposure to these and other fumes is a serious health risk and can cause serious diseases.

Why FumeVac

Welding can be a dangerous job

Working with high temperatures and flame increase the opportunity of burns to the skin and welder flash to the eyes. However, a much less noticeable but equally dangerous hazard involves welding fume.

Welding fumes are formed when a metal is heated above its boiling point and its vapours condense into very fine, airborne particles that can cause both acute and long term chronic effects to your health, especially when inhaled.

Installing FumeVAc Extraction Equipment

By far one of the most effective and efficient methods of welding fume removal is the incorporation of a fume extractor. Adjustable to your work space, a FumeVac extractor will withdraw and filter out fume at the source, reducing the risk of contamination to the surrounding work area.

Affordable quality products, backed up with exceptional after-sales service.